Ask a Question
4D-300 (COOLANT/OIL) SERIES
Industrial Vacuum Cleaner (Electrically Operated) for the Recovery of Large Quantities of Coolant/Oil mixed with some Metal Chips
/tempFiles/Guest-1062.JPG?applID=2&itID=946&scID=15
/tempFiles/Guest-1063.JPG?applID=2&itID=946&scID=15 /tempFiles/Guest-1061.JPG?applID=2&itID=946&scID=15 /tempFiles/Guest-1064.JPG?applID=2&itID=946&scID=15 /tempFiles/Guest-1065.JPG?applID=2&itID=946&scID=15 /tempFiles/Guest-2244.PNG?applID=2&itID=946&scID=15

Downloads


Description Link
4D-300 (COOLANT/OIL) SERIES Brochure
Technical Sheet & Info More Info
CSA Certificate of Compliance

Related Models

CS-300 (COOLANT/OIL) SERIES
Pneumatically (air) Operated Version

Certifications

Applicable Requirements :
ANSI/UL 1017
CSA C22.2 No.243


Features

  • Electric industrial vacuum system for the recovery of large quantities of coolant/oil mixed with some metal chips
  • The powerhead with dual bypass/dual speed long life motors is mounted directly on the recovery tank
  • The internal volume of the recovery tank is 55 gal. (200L). There is a basket in the upper part of the recovery tank which collects the metal chips
  • The basket can hold 10 gal. (30L) of metal chips, which allows 45 gal. (170L) of coolant/oil to be recovered in the lower part of the recovery tank
  • Coolant/oil is emptied using the manual drain valve
  • An electric discharge pump is available for emptying the recovered coolant/oil. The flow rate of the optional pump is 80 gallons per minute (300L/min)
  • Four 5" (125 mm) wheels, allow for maximum maneuverability
  • A floater (liquid cut-off) is installed under the powerhead to prevent overfilling
  • a 100 PPL Protection Filter is also included. The protection filter prevents smaller particles from getting into the pump

Technical Specs - North America

Switch to Europe / Asia

Specifications112636A112638A
Model Name4D-300 (COOLANT/OIL)4D-300 (COOLANT/OIL)
TypeElectric Electric
Tension120 V120 V
Frequency60 Hz60 Hz
PhaseSingle Single
Wattage2040 W2400 W
Power2.7 HP3.2 HP
Amperage15.2 A21 A
Air Flow200 CFM220 CFM
Vacuum Pressure90 " H20107 " H20
Type of Power OutletNot Included Not Included
Suction Inlet Port80 mm 80 mm
Cart TypeCarriage Base (CB) Carriage Base (CB)
Liquid Recovery Capacity45 gal.45 gal.
Solid Recovery Capacity10 gal.10 gal.
Length47 "47 "
Width24 "24 "
Height51 "51 "
Weight (Vacuum Only)415 lb.415 lb.
Cord Length33 ft.33 ft.
Please note that specifications are subject to change without notice