CS-300 (COOLANT/OIL) SERIES

Description	Link
CS-300 (COOLANT/OIL) SERIES	Brochure
Technical Sheet & Info	More Info

Description

Link

Technical Sheet & Info

Pneumatic (air-operated) industrial vacuum system for the recovery of large quantities of coolant/oil mixed with some metal chips
The single or twin venturi powerhead with 6 mm air jets is mounted directly on the recovery tank
The internal volume of the recovery tank is 55 gal. (200L). There is a basket in the upper part of the recovery tank which collects the metal chips
The basket can hold 10 gal. (30L) of metal chips, which allows 45 gal. (170L) of coolant/oil to be recovered in the lower part of the recovery tank
Coolant/oil is emptied using the manual drain valve
An electric discharge pump is available for emptying the recovered coolant/oil. The flow rate of the optional pump is 80 gallons per minute (300L/min)
Four 5" (125 mm) wheels, allow for maximum maneuverability
A floater (liquid cut-off) is installed under the powerhead to prevent overfilling
a 100 PPL Protection Filter is also included. The protection filter prevents smaller particles from getting into the pump

Specifications	112616	112618
Model Name	CS-300 (COOLANT/OIL) SINGLE VENTURI	CS-300 (COOLANT/OIL) TWIN VENTURI
Type	Pneumatic	Pneumatic
Venturi	Single	Twin
Venturi (diam.)	6 mm	6 mm
Minimum Compressor	15 HP	30 HP
Air Line Size (Diam.)	1/2 "	1 "
Input Air Volume	45 CFM	100 CFM
Input Air Pressure	80 PSI	100 PSI
Air Flow	120 CFM	195 CFM
Vacuum Pressure	170 " H₂0	230 " H₂0
Suction Inlet Port	80 mm	80 mm
Liquid Recovery Capacity	45 gal.	45 gal.
Solid Recovery Capacity	10 gal.	10 gal.
Length	47 "	47 "
Width	24 "	24 "
Height	51 "	51 "
Weight (Vacuum Only)	410 lb.	420 lb.

Please note that specifications are subject to change without notice