Ask a Question
CS-300 (COOLANT/OIL) SERIES
Industrial Vacuum Cleaner (Pneumatic (air-operated)) for the Recovery of large quantities of Metal Chips mixed with Coolant/Oil (mostly Liquids)
/tempFiles/Guest-1057.JPG?applID=2&cID=35&itID=944
/tempFiles/Guest-1063.JPG?applID=2&cID=35&itID=944 /tempFiles/Guest-1061.JPG?applID=2&cID=35&itID=944 /tempFiles/Guest-1064.JPG?applID=2&cID=35&itID=944 /tempFiles/Guest-1065.JPG?applID=2&cID=35&itID=944 /tempFiles/Guest-934.JPG?applID=2&cID=35&itID=944 /tempFiles/Guest-2245.PNG?applID=2&cID=35&itID=944

Downloads


Description Link
CS-300 (COOLANT/OIL) SERIES Brochure
Technical Sheet & Info More Info

Related Models

4D-300 (COOLANT/OIL) SERIES
Electrically Operated - Single Phase - Dual Motor Version

Certifications


Features

  • Pneumatic (air-operated) industrial vacuum system for the recovery of large quantities of coolant/oil mixed with some metal chips
  • The single or twin venturi powerhead with 6 mm air jets is mounted directly on the recovery tank
  • The internal volume of the recovery tank is 55 gal. (200L). There is a basket in the upper part of the recovery tank which collects the metal chips
  • The basket can hold 10 gal. (30L) of metal chips, which allows 45 gal. (170L) of coolant/oil to be recovered in the lower part of the recovery tank
  • Coolant/oil is emptied using the manual drain valve
  • An electric discharge pump is available for emptying the recovered coolant/oil. The flow rate of the optional pump is 80 gallons per minute (300L/min)
  • Four 5" (125 mm) wheels, allow for maximum maneuverability
  • A floater (liquid cut-off) is installed under the powerhead to prevent overfilling
  • a 100 PPL Protection Filter is also included. The protection filter prevents smaller particles from getting into the pump

Technical Specs - North America

Switch to Europe / Asia

Specifications112616112618
Model NameCS-300 (COOLANT/OIL) SINGLE VENTURICS-300 (COOLANT/OIL) TWIN VENTURI
TypePneumatic Pneumatic
VenturiSingle Twin
Venturi (diam.)6 mm6 mm
Minimum Compressor15 HP30 HP
Air Line Size (Diam.)1/2 "1 "
Input Air Volume45 CFM100 CFM
Input Air Pressure80 PSI100 PSI
Air Flow120 CFM195 CFM
Vacuum Pressure170 " H20230 " H20
Suction Inlet Port80 mm 80 mm
Liquid Recovery Capacity45 gal.45 gal.
Solid Recovery Capacity10 gal.10 gal.
Length47 "47 "
Width24 "24 "
Height51 "51 "
Weight (Vacuum Only)410 lb.420 lb.
Please note that specifications are subject to change without notice